http://www.jcxsteelrollformer.com
Home > Products > Crash Barrier Roll Forming Machine > 2 Wave Guradrail Roll Forming Machine > Crash barrier forming equipment

Crash barrier forming equipment

    Payment Type: L/C
    Min. Order: 1 Bag/Bags
Basic Info

Model No.: 2 wave guardrail

Additional Info

Productivity: 25sets/Month

Place of Origin:  China

Supply Ability: 25sets/Month

Product Description

Crash barrier forming equipment

crash barrier forming equipment have been designed for producing w beam guardrails with 2 wave and 3 waves or thrie beams placed on both sides of highway or expressway.The driving of machine is gear box,that is more stable than chain driving.It is composed of Manual Decoiler,material feeding,raw material levelling,punching device,main forming,automatic cutting.

The final product can be cut as per set length controller,and the length is automatically measured by encoder.When final product reached set length,machine will stop to cut the sheet automatically.Finish thhis action,the machine will run again continuously ,and extram beam is required to fix guardrail.punching holes are required on that.Common thickness 3-4mm.The driving of guarail forming machine is different.


1.Main parameters of step tile :
Parameters of raw material
Material Thickness I.D Yield Strength
Q235
galvanized strip
3-4mm 508mm <=235mpa
Decoiling → Roll Forming →Hydraulic cuttingCollecting table
2.Photos of Machine:

Guardrail Roll Forming Machine
3.Technology parameters:
The weight of machine is about3.1tons.The total dimension of machine:6800(L)*1200(W)*1500mm(H)
3.1Manual decoiler:
Capacity of uncoiler:10tons
Expansion of segment:Manual
Rotation of segment:Manual
Number of segment:4
Range of segment expansion:480-520mm
Operation method:Manual
3.2 Guiding system:
with lelveling rollers
3.3Main forming machine:
Coil thickness:4mm
motor type: 3 phase asynchronous motor
Main motor power:22kw(2sets)
Approx.15groups roller including
Roller : CR12 with quenching treatment,Shafts of rollers are tooled by grinding machine for two times to ensure the precision of final product.

Shaft:Diameter of max shaft: ø120mm(hardening and tempering)

Transmission type:by reduction box

3.4 Hydraulic cutting:
Material of blade: Cr12Mov,HRC58-62
Length measuring: Automatic encoder length measuring
Type of cutting:Cutting after forming:Cut the sheet after roll forming to required length.No need to change mold for different sizes
Cutting motion:The main machine automatically stops and the cutting will take place.After the cutting,the main machine will automatically start.
Power of motor:3kw
3.5 Product support frame
Size: L 3m x W0.5m

Looking for ideal Crash Barrier Forming Equipment Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Guard Rail Roll Forming Machine are quality guaranteed. We are China Origin Factory of Crash Barrier Forming Machines. If you have any question, please feel free to contact us.

Product Categories : Crash Barrier Roll Forming Machine > 2 Wave Guradrail Roll Forming Machine

Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters
Communicate with Supplier?Supplier
JIE YANG Mr. JIE YANG
What can I do for you?
Chat Now Contact Supplier