http://www.jcxsteelrollformer.com
Home > Products > Standing Seam Roof Roll Forming Machine > Nail Strip Standing Seam Forming Machine > Snap locking standing seam roll forming machine

Snap locking standing seam roll forming machine

    Payment Type: L/C
    Min. Order: 1 Bag/Bags
Basic Info

Model No.: snap locking standing seam

Additional Info

Productivity: 25sets/Month

Place of Origin:  China

Supply Ability: 25sets/Month

Product Description

Snap locking standing seam Roll Forming Machine

Snap-Lock standing seam Roofing Panel no need seaming and cliper.It is composed of Manual Decoiler,main forming mart,automatic cutting,collecting table.It is now a stronger and more durable panel which withstands the extreme weather that wreaks havoc on most roofs. This panel is available in both 26 and 24 gauge and is custom produced in the factory with 10 popular colours and 2 sizes, 12" and 16".

Our snap locking standing seam roll forming machine can be used a workshop.

The final product can be cut as per set length controller,and the length is automatically measured by encoder.When final product reached set length,machine will stop to cut the sheet automatically.Finish thhis action,the machine will run again continuously.Clip lock standing seam machine and nail strip standing seam roof machine are very popular for now.Any inquiry just contact us.




1.Main parameters of snap lock standing seam machine
Parameters of raw material
Material Thickness I.D Yield Strength
Q235
gi&ppgi& galvalume
0.25-0.7mm 508mm <=235mpa
Decoiling → Roll Forming →Hydraulic cuttingCollecting table
2.Photos of Machine:

Snap Locking Standing Seam Roof MachineSnap Lock Standing Seam


3.Technology parameters of nail strip standing seam roll forming machine:
The weight of machine is about3.1tons.The total dimension of machine:6800(L)*1200(W)*1500mm(H)
3.1Manual decoiler:
Capacity of uncoiler:5tons
Expansion of segment:Manual
Rotation of segment:Manual
Number of segment:4
Range of segment expansion:480-520mm
Operation method:Manual
Qty: 1
3.2 Guiding system:
To keep the material straight
Entrance and adjustable wheel: 2rolls
Qty: 1
3.3Main forming machine:
Coil thickness:0.25-0.7mm
motor type: 3 phase asynchronous motor
Main motor power:4kw+3kw(normal speed),
Approx.18groups roller including
Roller : S45C with quenching treatment,Shafts of rollers are tooled by grinding machine for two times to ensure the precision of final product.

Shaft:Diameter of max shaft: ø70mm(hardening and tempering)

Transmission type:by one inch chain

Qty: 1
3.4 Hydraulic cutting:
Material of blade: Cr12Mov,HRC58-62
Length measuring: Automatic encoder length measuring
Type of cutting:Cutting after forming:Cut the sheet after roll forming to required length.No need to change mold for different sizes
Cutting motion:The main machine automatically stops and the cutting will take place.After the cutting,the main machine will automatically start.
Power of motor:3kw
3.5 Product support frame
Size: L 3m x W0.5m

Looking for ideal Snap Locking Standing Seam Machine Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Snap Locking Standing Seam Forming Machine are quality guaranteed. We are China Origin Factory of Snap Lock Standing Seam Machine. If you have any question, please feel free to contact us.

Product Categories : Standing Seam Roof Roll Forming Machine > Nail Strip Standing Seam Forming Machine

Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters
Communicate with Supplier?Supplier
JIE YANG Mr. JIE YANG
What can I do for you?
Chat Now Contact Supplier