Contact Supplier

Mr. Jason Zhang

Leave a message

Contact Now

Rolling shutter door making machine

Get Latest Price

Payment Type:

L/C

Min. Order:

1 Bag/Bags

Contact Now

Product Description

Product Attributes
Supply Ability & Additional Information

< >

Overview

Product Attributes

Model No.: 115

Supply Ability & Additional Information

Productivity: 40sets Per Month

Place of Origin: China Hebei

Supply Ability: 40sets Per Month

Certificate: ISO9001

Payment Type: L/C

Garage Rolling up Door Forming Machine

A rolling shutter door or roller shutter door is a type of door that consists of many horizontal slats hinge together and the door opens and closes by raising up or lowering down along a rolling shutter door track or guide rails.The rolling up door forming machine is automatic machine which can make different legnth as per your set.Shutter door forming machine is fully automatic machine.

The final product can be cut as per set length controller,and the length is automatically measured by encoder.When final product reached set length,machine will stop to cut the sheet automatically.Finish thhis action,the machine will run again continuously

rolling shutter door machine

1.Profile of shutter door design:

shutter door forming machine

2.Working process of rolling up door forming machine

shutter door forming machine

3.Technical details:

1.Un-coiler

Capacity: 3 tons

Material: #45 steel quenched

Power:2.2KW,03 Phase, 220/380V, 50HZ/60HZ

Method of open and close of segments: manual

Number of segments:4 pieces

Range of segment expansion: ø480- ø520

Inner diameter of coil: ø508

Maximum outer diameter of coil: ø1,300

Feeding speed:25m/min(transducer control)

2.Main roll former

Stations: 12

Rollers material: CR 15, HRC 60. Chrome coated: 0.03-0.05mm, Strength (MPA): 70 tons, 800 MPA

Shaft: diameter 50mm, material is #45 steel. Quenched hot treatment. Strength of the main shaft (MPA): 70 tons, 650MPA

Bearing brand: FAG Germany

Main motor: 7.5KW, 380/220V, 50/60HZ, 3 Phases (OMD Brand)

Transmission by gear

Station material: cast steel

Machine is equipped with cooling system

3.PLC control cabinet

Touch screen brand: Delta

PLC brand: Siemens

Inverter brand: Siemens

Main components for low pressure electricity: Schneider Germany

Encoder: Omron

Sensor: Balluff B+F brand

Control motion/production process: Un-Coiler---12 stations roll forming machine---Hydraulic cutting by servo---output table

4.Cutting platform

Cutting type: hydraulic cutting with servo motor

The material of knives: CR12MOV; heat treatment HRC 55-60, Quenched; the Strength in MPA: 950

Servo motor: 1.5KW, 220V

Tolerance of length: ±0.5mm

Action: the host does not stop, servo track to cut off

5.Hydraulic Station parameter

Hydraulic Motor: 5.5KW, 220V/380V, 50HZ/60HZ, 3 Phases, Siemens brand

Hydraulic pump: Yuken brand Taiwan

Hydraulic valve: Rexroth Germany

Hydraulic cylinder: China

The Hydraulic station have Accumulator

The stations have 1 valves

6.Output table

Length: 8 meters

Drive type: rollers

7.Input material

Material: galvanized sheet

Galvanized steel: 0.8-1.0mm

8.Dimension (L*W*H)

Roll forming machine space: 6.4m*1.55m*1.36m

Working space:12m*3m*3m

9.Working speed

15-18m/min (including cutting)

10.Include the following normal consumable spares

Bearing in main shaft: 10 pcs

Other bearing (sub-rollers): a few

Limit switch:2 pcs

Low pressure electricity: a few

Relay:8 pcs

Oil tube: 2 pcs for each tool

Connector: a few

Cutting knives: 2 extra

Upper shaft and down shaft: 2 pieces

Station: 1 pieces

Gear: 2 pieces

Product Categories : Roller Shutter Door Roll Forming Machine > Metal Rolling Shutter Doors Forming Machine

Hot Products

Email to this supplier

*Subject:
*To:

Mr. Jason Zhang
*Email:
*Message:

Your message must be between 20-8000 characters