http://www.jcxsteelrollformer.com
Home > Products > Standing Seam Roof Roll Forming Machine > Kr18 Standing Seam Forming Machine > Kr18 Standing seam roof forming machine

Kr18 Standing seam roof forming machine

    Payment Type: L/C
    Min. Order: 1 Bag/Bags
Basic Info

Model No.: kr18

Additional Info

Productivity: 40sets Per Month

Place of Origin:  China Hebei

Supply Ability: 40sets Per Month

Certificate: CE, ISO

Product Description

Kr18 Standing seam roof forming machine

Kr18 Standing Seam Roof Roll Forming Machine is used a lot in Mexico,most of customers use the machine at worksite.

The final product can be cut as per set length controller,and the length is automatically measured by encoder.When final product reached set length,machine will stop to cut the sheet automatically.Finish thhis action,the machine will run again continuously

the standing seam roof panels have a concealed fxing or seaming method by turning up the edges of two adjacent panels, and then folding or interlocking them. In this way, the seaming or fixing parts are invisible, and therefore sometimes we called the panels concealed fixing panels! The machine got its name as concealed fixing standing seam Roll Forming Machine accordingly!

we supply

Sandwich Roof Panel Roll Forming Machine

Bemo Standing Seam Roll Forming Machine

KR18 Standing Seam Forming Machine

Nail Strip Standing Seam Forming Machine

Clip Lock Standing Seam Roll Forming Machine

different designs can be made as your request


TECHNICAL PARAMETERS of roll forming machine


Standing seam roof panel specification:


Kr-18 Roofing Machine

1)Material:galvanized coil,ppgi,cooper,aluminium,al-mg-mn alloy

2) Thickness of material:22 &24&26 gauge

3)Yield strength:235-340mpa)

1.Main technical conditions of the forming line:

Temperatura: -10 ºC ~ 35 ºC(Temperature:-10ºC~35ºC)

Voltage:110volt 60Hz or 220volt 60Hz(or according to customer request

Air pressure:0.6~1.2Mpa

Total Power:≈4.5kw)

Color:

Production capacity:0-15meters/min(without cutting)

Dimension (L*W*H): L≈ 1.6 m, W≈ 1.5 m, H≈ 1.2 m

1.Flow Chart of roll forming machine:)

Kr-18 Roofing Machine


2.Main components:

No.

Components Name


Unit

Set/Pcs



Marks

1

3-4 tons manual uncoiler

1



2

Feeder

1



3

Roll Forming Machine

1


4

Electrical control system

1


5

Hydraulic Guillotin

1



6

Electric seamer

1


7

Receiving table

1



8

Bending Machine

1


9

Spare parts

1


10

Technical Manual

1


11

Customized container

1


3.Photos of Machine:

Kr-18 Roofing Machine

4.Technology parameters:

Length:4.2M
Width:1.2M
Height:1.3M
Weight: about 2.5-3Tons
Feeding width : 610mm
Effective width: 457mm
Thickness: 0.5-0.8mm
Power plant:gasoline diesel engine 15HP
Battery:12 Volt DC*2
Drive System: All hydraulic pump with engine
Working speed:10-13 m/min
Material of rollers: Good 45# steel, rigid chrome coated
Material of roller shafts: 45# steel, quenched HRC 58-62
Material of cutting blade: Cr12 steel
Forming station: 9-11 rollers coated with hard chromium.
Controlling: Handle controller
Transmission:Chain Gear
Cutting:Hydraulic system
Material:PPGI,Galvanized


Looking for ideal Standing Seam Roof Sheet Machine Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Stand Seam Roof Panel Forming Machine are quality guaranteed. We are China Origin Factory of Standing Seam Roof Panel Machine. If you have any question, please feel free to contact us.

Product Categories : Standing Seam Roof Roll Forming Machine > Kr18 Standing Seam Forming Machine

Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters
Communicate with Supplier?Supplier
JIE YANG Mr. JIE YANG
What can I do for you?
Chat Now Contact Supplier