Botou Golden Integrity Roll Forming Machine Co.,Ltd

Products

Home > Products > Roof And Wall Panel Roll Forming Machine > Trapezoidal Sheet Roll Forming Machine > Pbr Panel Roll Forming Machine

Pbr Panel Roll Forming Machine

Payment Type:
L/C
Min. Order:
1 Bag/Bags
Share:
  • Product Description
Overview
Product Attributes

Model No. pbr

Supply Ability & Additional Information

Productivity40sets Per Month

Place of Origin China Hebei

Supply Ability40sets Per Month

CertificateCE, ISO

Payment TypeL/C

Pbr Panel Roll Forming Machine

pbr panel are used a lot in USA and North America:


Roll forming machine has many cost advantages over brake forming and preformed panels.  If you are not familiar with what roll forming can do for your bottom line, here are just a few of the savings you can expect...· 

No Expensive Shipping and Crating of Long Panels
(Have coils delivered right to your shop or jobsite

No Panel Shipping Damage and Extensive Delays
(Just try to order one replacement panel from the factory)

Less Labor and Waste
(Run your panels to the exact length without time and material waste)

Work On Your Own Schedule - Not The Factory's
(When roof is ready -- just run your panels)

Form Perfect Panels To Any Length
(Form long panels at the site or on the roof without crating problems)

· specialized manufacturer of 

Wall Panel Roof Forming Machine

K Gutter Roll Forming Machine

Half Round Gutter Roll Forming Machine

Rain Gutter Roll Forming Machine

Auto Roll Forming Machine Stacker

Steel Slitting Line

pbr panel roll forming machine photos
Pbr Panel Roll Forming Machine
Pbr Panel Roll Forming Machine



1. Detailed Parameters of roof sheet roll forming machine
No  
1
 
Suitable Material Colored Steel plate, Galvanized Board, Aluminum Plate
2
 
Width of the raw material 1000mm
3 Rows of rollers 14 rows 
4 Appearance size 6.8*1.4*1.5m
5 Total power 3.7 kw
6 Thickness of raw material 0.2-0.8mm
7 Productivity 3-4m/min
8 Diameter of shaft ¢70mm
9
 
Voltage 380V  50Hz 3phases


2. The Chart of Process Flow of roof panel forming machine
 Pbr Panel Roll Forming Machine

2.1. Components and Technical Specification
No   Technical Specification
1      Manual Uncoiler
 
Usage: It is used to support the steel coil and uncoil it in a turntable way. The steel coil is uncoiled by hand. Loading capacity:5T
Inner diameter: 500-508mm
2    Feeding Table
 
Put the raw material (steel plate) through the beach to manufacture and process, it can guarantee that the products are neat, parallel and everything is uniformity. Please refer to the equipment regulation to know the function of locate angle iron.
3 Main Roll Forming Machine
 
Material of rollers:45# steel,roller surfaces polishing, hard plating , The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stamped.
 
4   Shearing Mechanism
 
It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products.
Material of blades: Cr12,quenching treatment
5      Press Form
 
Press Form
Material of blades: Cr12,quenching treatment
6  Hydraulic System
 
Power:4kw,Hydraulic oil: 40#
Hydraulic oil into the hydraulic oil tank, the pump drives the cutter machine to begin the cutting job.
7   Computer Control Cabinet
 
The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use PLC
8            Spare parts one box

3. Packing Method
Main machine is nude; the computer control box is packed by carton box
4. Transportation
 All machines need one 40 feet container to hold
5. Payment Term 
   30% deposit by T/T in advance and 70% balance after inspection confirmation before shipment
6. Delivery Time
   Within 30 days after receiving deposit.
Warranty   Two years, and we will provide technical support for whole life of the equipment.
Note:
If the plate with a coating,the coating should be consistent with coating inspection standards of the relevant color-coated,should not have skin off,so as not to effect quality of roll forming.
If the material is galvanized steel,the galvanized should be consistent with the relevant testing standards of the galvanized steel,should not have zinc layer off,so as not to effect the quality of roll forming.


Pbr Panel Roll Forming Machine
 

Product Categories : Roof And Wall Panel Roll Forming Machine > Trapezoidal Sheet Roll Forming Machine

Email to this supplier
  • *Subject:
  • *To:
    Mr. Jason Zhang
  • *Email:
  • *Message:
    Your message must be between 20-8000 characters

Home > Products > Roof And Wall Panel Roll Forming Machine > Trapezoidal Sheet Roll Forming Machine > Pbr Panel Roll Forming Machine

Send Inquiry
*
*

Send Inquiry

Jason Zhang

Mr. Jason Zhang

Email:

Send Inquiry

Tel:86-318-8189095

Fax:86-317-8189095

Mobile Phone:+8615720371583Contact me with Whatsapp

Email:

Address:ECONOMIC DEVELOPMENT ZONE, Cangzhou, Hebei

Mobile Site

Home

Product

Whatsapp

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send